Cedar Falls Epoxy Flooring has been installing commercial epoxy flooring for more than 20 years in Cedar Falls, IA, serving surrounding cities including Waterloo, Evansdale, Waverly, Independence and Oelwein. We coat floors in retail stores, offices, clinics, auto service bays, gyms and public buildings, where the floor has to look professional, clean easily and hold up to steady traffic.
A commercial floor job is less about square footage than about the people around it. Customers, staff and equipment all have to keep moving, so every project is planned around your hours, with phasing, night and weekend work and fast-return systems where they make sense.
The standards under the floor do not change because the job is bigger. Every slab is ground to a named profile, a moisture test is written into the scope before pricing, and the quote names the product line, coat count and finished thickness so a facilities manager can check the result against the specification.
Commercial Spaces We Coat
Retail Stores, Offices and Clinics
In customer-facing spaces, the floor has to look finished and stay that way through daily foot traffic, carts and cleaning. Solid color, decorative flake and metallic epoxy systems give a seamless, easy-care surface, and saw-cut borders or logos can tie the floor into the brand.
Clinics and offices also benefit from a floor without grout lines, which is simpler to keep clean. We choose the topcoat and sheen to balance appearance, slip resistance and the cleaning products your crew already uses.
Auto Service Bays and Dealerships
Service bays see oil, brake fluid, coolant, hot tires and dropped tools, plus a winter of road salt on every vehicle that rolls in. We specify thick, chemical-resistant systems with a textured topcoat that stays safe underfoot when floors are wet.
Dealership showrooms get a cleaner, glossier finish next door, often in matching colors. Phasing between bays keeps the shop open while each section is ground, coated and cured.
Gyms, Locker Rooms and Restrooms
Fitness spaces, locker rooms and restrooms need floors that stand up to moisture, sweat and frequent cleaning. Quartz broadcast systems give strong slip resistance and a seamless surface that does not trap water the way grout does.
Where floors meet walls, a coved base carries the coating up a few inches so the joint can be mopped clean. We schedule this work around early-morning and late-evening members.
Scheduling Around an Open Business
Phasing, Nights and Weekends
We break larger floors into phases that match how the space is used and seal each area off from the rest of the building. Grinding and coating can happen overnight or across a weekend so the business reopens on a dry, walkable floor.
The schedule is written down before the job starts, with the return-to-service time for each phase. Facility teams know exactly when each area will be closed and when it will be back.
Odor, Ventilation and VOC Limits
Floor coatings sold in the United States must meet the federal VOC limits under 40 CFR 59 Subpart D, and Iowa does not add its own rule. Even so, most coatings have an odor while they cure, and that matters in an occupied building.
We plan ventilation, isolate return air where possible and offer lower-odor systems for spaces like clinics and offices. After-hours work keeps the smell away from staff and customers.
Paperwork for Commercial Projects
Insurance, Registration and No Invented Licenses
Cedar Falls does not issue a contractor license of its own. Contractors doing permitted work file a certificate of liability insurance with INRCOG, and contractors working in Iowa register with the state under Iowa Code chapter 91C.
We carry the certificate of insurance a permit office, landlord or general contractor asks for. We do not claim a license or certification that Iowa or Cedar Falls does not issue.
University and Public Work
University of Northern Iowa projects are bought by the Iowa Board of Regents through sealed electronic bids, with a performance and payment bond after award and a Targeted Small Business participation goal. Renovations often run in phases inside buildings that stay in use.
For that kind of work, cure time and odor have to fit a vacated phase, a break or a summer window. We read every requirement in the bid documents before committing to a schedule.
Permits and the City
The Cedar Falls building FAQ lists painting, wall papering, tiling and carpeting as work that does not need a permit, but it does not name floor coatings. When a coating rides along with other permitted work, it is usually covered by that project. If you are unsure whether your project needs a permit, we recommend asking Cedar Falls Inspection Services before work begins.
Choosing a Commercial System
Moisture Testing Commercial Slabs
Commercial slabs are often slab-on-grade with unknown vapor retarders beneath them, and a failed floor in a busy space is expensive to fix. We test with in-situ relative humidity probes under ASTM F2170 or calcium chloride testing under ASTM F1869 before pricing.
High readings mean a moisture-mitigation primer or a different system. The warranty exclusions for moisture and hydrostatic pressure are explained before the job is sold.
Safety Lines and Markings
Warehouses, service bays and back-of-house areas often need painted lanes, walkways and hazard markings. We build these into the coating system so they wear with the floor rather than peeling as separate paint. Colors and widths are planned with your safety team before the topcoat goes down.
- 20+ Years of Floor Work
- Moisture Test in Every Scope
- Free Written Estimates